Please Whitelist This Site?
I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)
If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.
If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.
Thanks for your understanding!
Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide
|
NOTE: Using software to mass-download the site degrades the server and is prohibited. If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.
|
|
|
|
|
The TCP/IP Guide
9 TCP/IP Application Layer Protocols, Services and Applications (OSI Layers 5, 6 and 7)
9 TCP/IP Key Applications and Application Protocols
9 TCP/IP File and Message Transfer Applications and Protocols (FTP, TFTP, Electronic Mail, USENET, HTTP/WWW, Gopher)
9 TCP/IP Electronic Mail System: Concepts and Protocols (RFC 822, MIME, SMTP, POP3, IMAP)
9 TCP/IP Electronic Mail Delivery Protocol: The Simple Mail Transfer Protocol (SMTP)
|
SMTP Connection and Session Establishment and Termination
(Page 4 of 4)
Connection Termination
When the sending device is finished
sending all the e-mail it has to transfer to the receiving device, and
done with all other activities, it terminates the session by issuing
the QUIT command. This normally results in a 221 goodbye
message from the SMTP receiver, saying something like closing
transmission channel. The TCP connection is then terminated.
A server may also terminate prematurely
in special cases. If it is given a local command to shut down (for example,
due to imminent rebooting of the hardware server upon which it is running),
it may respond to any routine command with a 421 response (Service
not available, closing transmission channel). A server is not
supposed to terminate a session simply due to receipt of an invalid
command, however, only in special cases where session termination cannot
be avoided.
Key Concept: An SMTP session consists of three basic phases. The session is first established through the creation of a TCP connection and the exchange of identity information between the SMTP sender and receiver using the HELO command. Once established, mail transactions can be performed. When the SMTP sender is done with the session, it terminates it using the QUIT command. If SMTP extensions are supported, the SMTP sender uses the EHLO (extended hello) command instead of HELO, and the SMTP receiver replies with a list of extensions it will allow the SMTP sender to use. |
If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005
© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|