Please Whitelist This Site?
I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)
If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.
If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.
Thanks for your understanding!
Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide
|
NOTE: Using software to mass-download the site degrades the server and is prohibited. If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.
|
|
|
|
DHCP Autoconfiguration / Automatic Private IP Addressing (APIPA)
(Page 2 of 3)
APIPA Operation
APIPA is really so simple that it's
surprising it took so long for someone to come up with the idea. It
takes over at the point where any DHCP lease process fails. Instead
of just halting with an error message, APIPA randomly chooses an address
within the aforementioned private addressing block. It then performs
a test very similar to the one in step #13 in the
DHCP allocation process: it uses ARP to
generate a request on the local network to see if any other client responds
using the address it has chosen. If there is a reply, APIPA tries another
random address and repeats the test. When the APIPA software finds an
address that is not in use, it is given to the client as a default address.
The client will then use default values for other configuration parameters
that it would normally receive from the DHCP server. This process is
illustrated in Figure 269.
Figure 269: DHCP Automatic Private IP Addressing (APIPA) In this example, Client #1 is trying to get an IP address from its DHCP server, but the server is out of addresses, so it does not respond to the clients requests. The client is configured to use APIPA, so it randomly selects an address from the APIPA address block. It sends an ARP Request on the local network to see if any other device is using that address; in this case, Usually there will be no conflict, but here Client #2 is in fact using the address, so it responds. Client #1 chooses a different address and this time gets no reply. It begins using that address, while continuing to check regularly for a DHCP server to come online.
|
A client using an autoconfigured
address will continue to try to contact a DHCP server periodically.
By default, this check is performed every five minutes. If and when
it finds one, it will obtain a lease and replace the autoconfigured
address with the proper leased address.
APIPA is ideally suited to small
networks, where all devices are on a single physical link. Conceivably,
with 20 APIPA-enabled DHCP clients on a network with a single DHCP server,
you could take the server down for maintenance and still have all the
clients work properly, using 169.254.x.x addresses.
If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005
© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|