Please Whitelist This Site?
I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)
If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.
If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.
Thanks for your understanding!
Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide
|
NOTE: Using software to mass-download the site degrades the server and is prohibited. If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.
|
|
|
|
DHCP Lease "Life Cycle" Overview (Allocation, Reallocation, Renewal, Rebinding and Release) and Lease Timers
(Page 1 of 2)
The use of dynamic address allocation
in DHCP means a whole new way of thinking about addresses. A client
no longer owns an address, but rather leases it. This means that
when a client machine is set to use DHCP dynamic addressing, it can
never assume that it has an address on a permanent basis. Each time
it powers up, it must engage in communications with a DHCP server to
begin or confirm the lease of an address. It also must perform other
activities over time to manage this lease and possibly terminate it.
The DHCP Lease "Life Cycle"
Calling dynamic address assignments
leases is a good analogy, because a DHCP IP address lease is
similar to a real world lease in a number of respects. For
example, when you rent an apartment, you sign the lease. Then you use
the apartment for a period of time. Typically, assuming you are happy
with the place, you will renew the lease before it expires, so
you can keep using it. If by the time you get near the end of the lease
the owner of the apartment has not allowed you to renew it, you will
probably lease a different apartment to ensure you have somewhere to
live. And if you decide, say, to move out of the country, you may terminate
the lease and not get another at all.
DHCP leases follow a similar lease
life cycle, which generally consists of the following phases:
- Allocation: A client begins with no active
lease, and hence, no DHCP-assigned address. It acquires a lease through
a process of allocation.
- Reallocation: If a client already has
an address from an existing lease, then when it reboots or starts up
after being shut down, it will contact the DHCP server that granted
it the lease to confirm the lease and acquire operating parameters.
This is sometimes called reallocation; it is similar to the full
allocation process but shorter.
- Normal Operation: Once a lease is active,
the client functions normally, using its assigned IP address and other
parameters during the main part of the lease. The client
is said to be bound to the lease and the address.
- Renewal: After a certain portion of the
lease time has expired, the client will attempt to contact the server
that initially granted the lease, to renew the lease so it can
keep using its IP address.
- Rebinding: If renewal with the original
leasing server fails (because, for example, the server has been taken
offline), then the client will try to rebind to any active DHCP
server, trying to extend its current lease with any server that will
allow it to do so.
- Release: The client may decide at any
time that it no longer wishes to use the IP address it was assigned,
and may terminate the lease, releasing the IP address. Like the
apartment-renter moving out of the country, this may be done if a device
is moving to a different network, for example. Of course, unlike DHCP
servers, landlords usually don't let you cancel a lease at your leisure,
but hey, no analogy is perfect.
Figure 259
illustrates the DHCP life cycle using an example that spans three leases.
Figure 259: DHCP Life Cycle Example In this example, the initial lease has a duration of eight days and begins at Day 0. The T1 and T2 timers are set for 4 days and 7 days respectively. When the T1 timer expires the client enters the renewal period, and successfully renews at Day 5 with a new 8-day lease. When this second leases T1 timer expires, the client is unable to renew with the original server. It enters the rebinding period when its T2 timer goes off, and is granted a renewed 8-day lease with a different server. Three days into this lease it is moved to a different network and no longer needs its leased address, so it voluntarily releases it.
|
If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005
© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|