Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Read offline with no ads or diagram watermarks!
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Internet Layer (OSI Network Layer) Protocols
           9  Internet Protocol (IP/IPv4, IPng/IPv6) and IP-Related Protocols (IP NAT, IPSec, Mobile IP)
                9  Internet Protocol Version 4 (IP, IPv4)
                     9  IP Datagram Encapsulation and Formatting

Previous Topic/Section
IP Datagram General Format
Previous Page
Pages in Current Topic/Section
12
3
Next Page
IP Datagram Size, Maximum Transmission Unit (MTU), Fragmentation and Reassembly
Next Topic/Section

IP Datagram Options and Option Format
(Page 3 of 3)

IP Options and Source Routing

Normally, IP datagrams are routed without any specific instructions from devices regarding the path a datagram should take from the source to the destination. It's the job of routers, using routing protocols, to figure out those details. In some cases, however, it may be advantageous to have the source of a datagram specify the route a datagram takes through the network. This is called source routing.

There are two IP options that support source routing. In each, the option includes a list of IP addresses specifying the routers that must be used, to reach the destination. When strict source routing is used, this means that the path specified in the option must be used exactly, in sequence, with no other routers permitted to handle the datagram at all. In contrast, loose source routing specifies a list of IP addresses that must be followed in sequence, but having intervening hops in between the devices on the list is allowed.

For full details on the exact structure used by each option type, please refer to RFC 791.

 


Previous Topic/Section
IP Datagram General Format
Previous Page
Pages in Current Topic/Section
12
3
Next Page
IP Datagram Size, Maximum Transmission Unit (MTU), Fragmentation and Reassembly
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.