Please Whitelist This Site?
I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)
If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.
If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.
Thanks for your understanding!
Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide
|
NOTE: Using software to mass-download the site degrades the server and is prohibited. If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.
|
|
|
|
TCP Operational Overview and the TCP Finite State Machine (FSM)
(Page 3 of 3)
Finite State Machine Steps Represent the Stages of a Connection
It's important to remember that this
state machine is followed for each connection. This means
at any given time TCP may be in one state for one connection to socket
X, while in another for its connection to socket Y. Also, the typical
movement between states for the two processes in a particular connection
is not symmetric, because the roles of the devices are not symmetric:
one device initiates a connection, the other responds; one device starts
termination, the other replies. There is also an alternate path taken
for connection establishment and termination if both devices initiate
simultaneously (which is unusual, but can happen). This is shown by
the color codings in Figure 210.
Thus, for example, at the start of
connection establishment, the two devices will take different routes
to get to ESTABLISHED: one device (the server usually) will pass
through the LISTEN state while the other (the client) will go
through SYN-SENT. Similarly, one device will initiate connection
termination and take the path through FIN-WAIT-1 to get back
to CLOSED; the other will go through CLOSE-WAIT and LAST-ACK.
However, if both try to open at once, they each proceed through SYN-SENT
and SYN-RECEIVED, and if both try to close at once, they go through
FIN-WAIT-1, CLOSING and TIME-WAIT roughly simultaneously.
Key Concept: The TCP finite state machine describes the sequence of steps taken by both devices in a TCP session as they establish, manage and close the connection. Each device may take a different path through the states since under normal circumstances the operation of the protocol is not symmetricone device initiates either connection establishment or termination, and the other responds. |
If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005
© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|