Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Searchable, convenient, complete TCP/IP information.
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Internet Layer (OSI Network Layer) Protocols
           9  Internet Protocol (IP/IPv4, IPng/IPv6) and IP-Related Protocols (IP NAT, IPSec, Mobile IP)
                9  Internet Protocol Version 4 (IP, IPv4)
                     9  IP Addressing
                          9  IP Classless Addressing: Classless Inter-Domain Routing (CIDR) / "Supernetting"

Previous Topic/Section
IP Classless Addressing Block Sizes and "Classful" Network Equivalents
Previous Page
Pages in Current Topic/Section
1
234
Next Page
IP Datagram Encapsulation and Formatting
Next Topic/Section

IP CIDR Addressing Example
(Page 1 of 4)

The multiple hierarchical levels of CIDR make the technology seem rather complicated. However, understanding how CIDR works really is not that difficult, assuming you already know how subnetting is done. In particular, if you know how VLSM functions, you basically already know how CIDR does, since they are pretty much the same thing. They differ only in the way that the hierarchical division of networks is accomplished, and the terminology.

To show how CIDR works better, let's take an example that will illustrate the power of classless addressing: its ability to selectively subdivide a large block of addresses into smaller ones that suit the needs of various organizations. Since address allocation in CIDR typically starts with larger blocks owned by larger Internet Service Providers (ISPs), let's start there as well.

Suppose we have an ISP that is just starting up. It's not a “major” ISP, but a moderate-sized one with only a few customers, so it needs only a relatively small allocation. It begins with the block 71.94.0.0/15. The “/15” on the end of the block address tells us that this is a block of addresses where the first 15 bits are the network ID and the last 17 the host ID. Of course, this block was obtained from a larger ISP, carved from a larger block of addresses by that ISP. For example, 71.94.0.0/15 would be equal to half of the address block 71.92.0.0/14, a quarter of the block 71.88.0.0/13, and so on.


Figure 83: Example Hierarchical Division Of A /15 CIDR Address Block

This diagram shows one method by which an ISP with a relatively large /15 address block (131,070 hosts) might choose to hierarchically divide it. In this case it is first divided in half into two /16 blocks. One is reserved, while the other is divided into four /18 blocks. Each of those is divided into blocks of a different size, to allow allocation to organizations requiring up to 62, 126, 254 or 510 hosts respectively.

 


Our ISP's block is equal in size to two Class Bs and has a total of 131,070 possible host addresses. This ISP can choose to divide this block in a variety of ways, depending on the needs of its clients and its own internal use. However, this ISP is just starting up, so it is not even sure of what its ultimate needs will be. Let's say it expects to resell about half of its address space to other ISPs, but isn't sure what sizes they will need yet. Of the other half, it plans to split it into four different sizes of blocks to match the needs of different-sized organizations.

To imagine how the ISP divides its address space, we can consider the analogy of cutting up a pie. The ISP will first “cut the pie in half” and reserve one half for its future ISP customers. It will then cut the other half into some large pieces and some small pieces. This is illustrated in Figure 83. (Okay, it’s a square pie. I wanted to show the individual small blocks to scale. Sue me. J)

The actual process of division might follow this progression (illustrated in Figure 84).:


Figure 84: Hierarchical Address Division Using Classless Addressing (CIDR)

 


Previous Topic/Section
IP Classless Addressing Block Sizes and "Classful" Network Equivalents
Previous Page
Pages in Current Topic/Section
1
234
Next Page
IP Datagram Encapsulation and Formatting
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.