Please Whitelist This Site?
I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)
If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.
If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.
Thanks for your understanding!
Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide
|
NOTE: Using software to mass-download the site degrades the server and is prohibited. If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.
|
|
|
|
RIP General Operation, Messaging and Timers
(Page 1 of 3)
RIP is a protocol for exchanging
routing information, so its operation can best be described in terms
of the messages used to exchange this information, and the rules for
when messages are sent. The RIP software in each router sends messages
and takes other actions both in reaction to certain events and in response
to triggers set off by timers. Timers are also used to determine when
routing information should be discarded if not updated.
RIP Messages and Basic Message Types
Communication between RIP software
elements in routers on an internetwork is accomplished through the use
of RIP messages. These messages are sent using the User
Datagram Protocol (UDP), with reserved
UDP port number 520 for RIP-1 and RIP-2, and 521 for RIPng. Thus, even
though RIP is considered part of layer three like other routing protocols,
it behaves more like an application in terms of how it sends messages.
The exact format of the message is version-dependent, and all three
formats (for RIP, RIP-2 and RIPng) are described in detail in their
own section. RIP messages can be either
sent to a specific device, or can be sent out for multiple devices to
receive. If directed to one device they are sent unicast; otherwise,
they are either broadcast (in RIP) or multicast (RIP-2 and RIPng).
There are only two basic message
types for all three versions of RIP:
- RIP Request: A message sent by
a router to another router asking it to send back all or part of its
routing table.
- RIP Response: A message sent by
a router containing all or part of its routing table. Note that despite
the name, this message is not sent just in response to
an RIP Request message, as we will see. So it's not really that
great a name
oh well.
Note: The original RIP also defined a few other message types: Traceon, Traceoff and a special message type reserved for use by Sun Microsystems. These are obsolete and no longer used, and were removed from the RIP-2 and RIPng standards. |
If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005
© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|