Please Whitelist This Site?
I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)
If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.
If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.
Thanks for your understanding!
Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide
|
NOTE: Using software to mass-download the site degrades the server and is prohibited. If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.
|
|
|
|
RIP Route Determination Algorithm and Metric
(Page 3 of 3)
Default Routes
In some cases it is not convenient
for every network or host in a large internetwork to be fully specified
with its own routing entry. In this case it may be advantageous to specify
a default route for the network to use in reaching hosts or networks
for which they have no information. The most common example of this
is when an autonomous system connects to the public Internet through
a single router. Except for that router, the rest of the local network
doesn't need to know how to access the Internet.
In RIP, information about a default
route is communicated by having routers intended to handle such traffic
send information about a dummy network with the address
0.0.0.0. This is treated as if it were a regular network when
information about routes is propagated on the internetwork using RIP
messages, but other devices recognize this special address and understand
it means a default route.
Note: The algorithm description in this topic is the basic one used by RIP. This is modified in certain ways to address some of the problems that can occur in special circumstances due to how the algorithm works. Topics later in this chapter describe these problems and the special features RIP includes to address them. |
Key Concept: Routing information is propagated between routers in RIP using a simple algorithm. On a regular basis, each router sends out RIP messages that specify what networks it can reach, and how many hops to reach them. Other routers directly connected to that one know that they can then reach those networks through that router at a cost of one additional hop. So if router A sends a message saying it can reach network X for a cost of N hops, each other router that connects directly to A can reach network X for a cost of N+1 hops. It will put that information into its routing table, unless it knows of an alternate route through another router that has a lower cost. |
If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005
© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|