The TCP/IP Guide - BGP Connectivity Maintenance: <i>Keepalive</i> Messages

Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)
If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide

NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Enjoy The TCP/IP Guide? Get the complete PDF!

The TCP/IP Guide

Custom Search

The TCP/IP Guide
9 TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9 TCP/IP Internet Layer (OSI Network Layer) Protocols
           9 TCP/IP Routing Protocols (Gateway Protocols)
                9 TCP/IP Exterior Gateway/Routing Protocols (BGP and EGP)
                     9 TCP/IP Border Gateway Protocol (BGP/BGP-4)
                          9 BGP Detailed Messaging, Operation and Message Formats

BGP Route Information Exchange: Update Messages

BGP Error Reporting: Notification Messages

BGP Connectivity Maintenance: Keepalive Messages
(Page 2 of 2)

BGP Keepalive Message Format

The point of a Keepalive message is the message itself; there's no data to be communicated. In fact, we want to keep the message short and sweet. Thus, it is really a “dummy” message containing only a BGP header—a nice change after that incredibly long Update message format! The format of the Keepalive message can be found in Table 140 and Figure 195.

**Table 140: BGP *Keepalive* Message Format**
Field Name	Size (bytes)	Description
*Marker*	16	*Marker:* This large field at the start of each BGP message is used for synchronization and authentication. See the discussion of the BGP general message format for details.
*Length*	2	*Length:* The total length of the message in bytes, including the fields of the header. Keepalive messages are fixed in length at 19 bytes.
*Type*	1	*Type:* BGP message type, value is 4 for Keepalive messages.

**Figure 195: BGP *Keepalive* Message Format**

There is also one other, special use of Keepalive messages: as acknowledgment of receipt of a valid Open message during initial BGP session setup.

Key Concept: BGP Keepalive messages are sent periodically during idle periods when no real information needs to be sent between connected BGP speakers. They serve only to keep the session alive, and thus contain only a BGP header and no data.

BGP Route Information Exchange: Update Messages

BGP Error Reporting: Notification Messages

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!

Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.