Please Whitelist This Site?
I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)
If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.
If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.
Thanks for your understanding!
Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide
|
NOTE: Using software to mass-download the site degrades the server and is prohibited. If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.
|
|
|
|
IPv6 Multicast and Anycast Addressing
(Page 2 of 5)
Multicast Scopes
The notion of explicitly scoping
multicast addresses is important. Globally-scoped multicast addresses
must be unique across the entire Internet, but locally-scoped addresses
are unique only within the organization. This provides tremendous flexibility,
as every type of multicast address actually comes in several versions:
one that multicasts only within a node, one on the local link (local
network), one on the local site and so on. The scope also allows routers
to immediately determine how broadly they should propagate multicast
datagrams, to improve efficiency and eliminate problems with traffic
being sent outside the area for which it is intended. Figure 102
illustrates the notion of scope graphically (and its quite pretty,
wouldnt you say? J)
Figure 102: IPv6 Multicast Scope This diagram shows how the notion of scope allows IPv6 multicasts to be limited to specific spheres of influence. The tightest scope is node-local scope, with a Scope ID value of 1. As the Scope ID value increases, the scope expands to cover the local network, site, organization, and finally, the entire Internet.
|
Key Concept: Multicast addresses are used to send data to a number of devices on an internetwork simultaneously. In IPv6 each multicast address can be specified for a variety of different scopes, allowing a transmission to be targeted to either a wide or narrow audience of recipient devices. |
If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support! |
|
|
Home -
Table Of Contents - Contact Us
The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005
© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.
|