| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Telnet Communications Model and the Network Virtual Terminal (NVT) (Page 3 of 4) NVT ASCII Control Codes Regular ASCII consists of 95 regular, printable characters (codes 32 through 126) and 33 control codes (0 through 31 and 127). The Telnet standard specifies that the output device must be able to handle all the printable characters, and it mandates how several of the other common ASCII control codes should be interpreted. Of these codes, three (0, 10 and 13) are required to be accepted by all Telnet software; five others are optional, but if supported, must be interpreted in a manner consistent with the Telnet specification. They are all described in Table 280.
Home - Table Of Contents - Contact Us The TCP/IP Guide (http://www.TCPIPGuide.com) Version 3.0 - Version Date: September 20, 2005 © Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved. Not responsible for any loss resulting from the use of this site. |